MAMBA BallBearingTurbo FIT Ford Falcon FG XR6 G6E F6 4" .70 NA GTX3576RS 1.05Hsg
Product Information | |
P/N. |
002-0562 |
Item Name |
MAMBA FORD FALCON G6E F6 XR6 GTX Billet Ball Bearing Turbocharger GTX3576RS with 4” .70 Compressor Housing and 1.05 T3 5 bolt Housing |
Situation |
Brand New In Box |
Application |
Support 500 ~ 650 HP |
Wheel Spec |
Comp. Wheel : 59.07 mm / 76.07 mm / Trim 60 (60-1 11+0 Billet Wheel w/ Extend Tapered Tip) Turbine Wheel : 62 mm / 68 mm / Trim 84 (GT35R) |
Comp. Housing |
Compressor Housing Inlet OD: 4” / 100mm Compressor Housing Outlet OD: 2.5” / 63.5 mm Compressor Housing A/R: .70 |
Turbine Housing |
Turbine Housing A/R : 1.05 Turbine Inlet Flange: T3 Turbine Outlet: STD 5 Bolt for XR6. (Fit factory XR6 Dump pipe) WG Hole : 34mm (Flapper Dia.: 38mm) |
Actuator |
0.8bar spring is pre-installed on the adjustable actuator |
Bearing system |
Ceramic Dual Ball Bearing |
Cooling System |
Oil and Water-Cooled system |
Kit Includes |
1 x 120cm Oil Feed line with 1mm restrictor and filter. 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket 1 x Oil Return Gasket 5 x Stud kit with copper coated nut Everything shown on picture included |
Made By |
MAMBATEK |
Warranty |
One year |
Product Information | |
P/N. |
002-0562 |
Item Name |
MAMBA FORD FALCON G6E F6 XR6 GTX Billet Ball Bearing Turbocharger GTX3576RS with 4” .70 Compressor Housing and 1.05 T3 5 bolt Housing |
Situation |
Brand New In Box |
Application |
Support 500 ~ 650 HP |
Wheel Spec |
Comp. Wheel : 59.07 mm / 76.07 mm / Trim 60 (60-1 11+0 Billet Wheel w/ Extend Tapered Tip) Turbine Wheel : 62 mm / 68 mm / Trim 84 (GT35R) |
Comp. Housing |
Compressor Housing Inlet OD: 4” / 100mm Compressor Housing Outlet OD: 2.5” / 63.5 mm Compressor Housing A/R: .70 |
Turbine Housing |
Turbine Housing A/R : 1.05 Turbine Inlet Flange: T3 Turbine Outlet: STD 5 Bolt for XR6. (Fit factory XR6 Dump pipe) WG Hole : 34mm (Flapper Dia.: 38mm) |
Actuator |
0.8bar spring is pre-installed on the adjustable actuator |
Bearing system |
Ceramic Dual Ball Bearing |
Cooling System |
Oil and Water-Cooled system |
Kit Includes |
1 x 120cm Oil Feed line with 1mm restrictor and filter. 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket 1 x Oil Return Gasket 5 x Stud kit with copper coated nut Everything shown on picture included |
Made By |
MAMBATEK |
Warranty |
One year |
IMPORTANT NOTES FOR BUYERS:
*WE CURRENTLY CARRY MOST OF THE ITEMS IN STOCK BUT SOME MAY BE OUT OF STOCK. PLEASE CONTACT US FOR STOCK AVAILABILITY BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*ETA FOR MAMBA PRODUCTS IS 6-8 WEEKS
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS