GCG Turbo Charger GCG5452R Bolt On Upgrade fits Mercedes Benz AMG A45
This custom built GCG5452R comes designed to bolt into the stock turbocharger location on the Mercedes Benz A45 CLA45 GLA45 AMG models. The turbocharger retains the factory twin scroll turbine housing, and also retains the factory compressor housing, to allow this turbocharger to bolt directly back onto the vehicle without any further fitment modifications. Replacement oil and water lines are also included, as the new core used has different thread adaptation.
The factory Borg Warner turbocharger on these vehicles works extremely well in a mildy tuned application, and is known for it's response and overall flow potential. However, once higher boost levels are required, it starts to run out of efficiency. This is where the custom GCG5452R comes into play. The Ball Bearing CHRA provides more power throughout the rev range, and utilizes a billet 6+6 blade compressor wheel, which is a larger diameter than the factory turbocharger. The Turbine is a mid trim GT30 Series variant.
Kit Contents:
- GCG5452R Custom Built Bolt-On Turbocharger
- Oil feed and water fittings, copper washers & fasteners
- Steel braided oil and water lines
Product Notes:
- This kit can have a delay of up to 7-10 days based on prior sales
- This particular turbo combination is for those wanting more top end power than low down response.
- Response: Test vehicle used showed full boost (30psi) at approx 4500rpm.
- HP Rating: 550bhp
Vehicle Fitment:
- 2013-2018 Mercedes Benz AMG A45 W176 (M133.980 2.0L)
- 2013-2019 Mercedez Benz AMG CLA45 C117/X117 (M133.980 2.0L)
- 2014-2019 Mercedez Benz AMG GLA45 X156 (M133.980 2.0L)
Please review the nominated handling/delivery times for this item and ensure this meets with your expected time frame.
Due to the Global Pandemic Worldwide some items may take longer than expected to reach the destination as freight loads have increased for all carriers, please be patient.
Vehicle Specific Information
Specifications
Fitment
This custom built GCG5452R comes designed to bolt into the stock turbocharger location on the Mercedes Benz A45 CLA45 GLA45 AMG models. The turbocharger retains the factory twin scroll turbine housing, and also retains the factory compressor housing, to allow this turbocharger to bolt directly back onto the vehicle without any further fitment modifications. Replacement oil and water lines are also included, as the new core used has different thread adaptation.
The factory Borg Warner turbocharger on these vehicles works extremely well in a mildy tuned application, and is known for it's response and overall flow potential. However, once higher boost levels are required, it starts to run out of efficiency. This is where the custom GCG5452R comes into play. The Ball Bearing CHRA provides more power throughout the rev range, and utilizes a billet 6+6 blade compressor wheel, which is a larger diameter than the factory turbocharger. The Turbine is a mid trim GT30 Series variant.
Kit Contents:
- GCG5452R Custom Built Bolt-On Turbocharger
- Oil feed and water fittings, copper washers & fasteners
- Steel braided oil and water lines
Product Notes:
- This kit can have a delay of up to 7-10 days based on prior sales
- This particular turbo combination is for those wanting more top end power than low down response.
- Response: Test vehicle used showed full boost (30psi) at approx 4500rpm.
- HP Rating: 550bhp
Vehicle Fitment:
- 2013-2018 Mercedes Benz AMG A45 W176 (M133.980 2.0L)
- 2013-2019 Mercedez Benz AMG CLA45 C117/X117 (M133.980 2.0L)
- 2014-2019 Mercedez Benz AMG GLA45 X156 (M133.980 2.0L)
Please review the nominated handling/delivery times for this item and ensure this meets with your expected time frame.
Due to the Global Pandemic Worldwide some items may take longer than expected to reach the destination as freight loads have increased for all carriers, please be patient.
Vehicle Specific Information
Specifications
Fitment
IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
