Custom MAMBA Ball Bearing For Subaru Turbocharger 3" GTX2867R w/ .57 T3 TD42 Hsg
Product Information | ||
P/N. |
002-0335 |
|
Item Name |
MAMBA Custom Ball Bearing 3" GTX2867R Anti Surge SUBARU turbocharger with T3 .57 TD42 Turbine Housing |
|
Situation |
Brand New In Box |
|
Spec |
Compressor Wheel : 49.7 mm / 67.4 mm/Trim 55 (11+0 GTX Billet Wheel w/ Extended Tip) Turbine Wheel: 47 mm / 53.8 mm / Trim 76 Compressor Housing Inlet OD: 3" / 76.2mm Compressor Housing Outlet OD: 2" / 51.3 mm Compressor Housing A/R: .60 Turbine Housing A/R : .57 (8cm Housing) Turbine Flange: T3 |
|
Application |
This turbo is custom Subaru turbo for up-pipe with T3 flange. Support 380~430HP |
|
Bearing system |
NTN Ceramic Dual Ball Bearing |
|
Cooling System |
Oil and Water-Cooled |
|
Actuator |
0.8bar spring pre-installed on the adjustable actuator. 1.2bar and 1.65bar spring will go with box. Stage 2 Viton Piston type of Adjustable actuator (Replace diaphragm type) |
|
Kit Includes |
1 x 30cm Oil Feed Line Kit with 1mm Restrictor 2 x 25cm Water Feed / Return Line Kit 1 x Turbo Oil Return Pipe Kit 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket 8 x 10mm Stud Kit with copper-coated nut 1 x VSR Balance Sheet 1 x Install Instruction Everything shown on picture is included |
|
Made By |
MAMBATEK |
|
Warranty |
One year |
Product Information | ||
P/N. |
002-0335 |
|
Item Name |
MAMBA Custom Ball Bearing 3" GTX2867R Anti Surge SUBARU turbocharger with T3 .57 TD42 Turbine Housing |
|
Situation |
Brand New In Box |
|
Spec |
Compressor Wheel : 49.7 mm / 67.4 mm/Trim 55 (11+0 GTX Billet Wheel w/ Extended Tip) Turbine Wheel: 47 mm / 53.8 mm / Trim 76 Compressor Housing Inlet OD: 3" / 76.2mm Compressor Housing Outlet OD: 2" / 51.3 mm Compressor Housing A/R: .60 Turbine Housing A/R : .57 (8cm Housing) Turbine Flange: T3 |
|
Application |
This turbo is custom Subaru turbo for up-pipe with T3 flange. Support 380~430HP |
|
Bearing system |
NTN Ceramic Dual Ball Bearing |
|
Cooling System |
Oil and Water-Cooled |
|
Actuator |
0.8bar spring pre-installed on the adjustable actuator. 1.2bar and 1.65bar spring will go with box. Stage 2 Viton Piston type of Adjustable actuator (Replace diaphragm type) |
|
Kit Includes |
1 x 30cm Oil Feed Line Kit with 1mm Restrictor 2 x 25cm Water Feed / Return Line Kit 1 x Turbo Oil Return Pipe Kit 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket 8 x 10mm Stud Kit with copper-coated nut 1 x VSR Balance Sheet 1 x Install Instruction Everything shown on picture is included |
|
Made By |
MAMBATEK |
|
Warranty |
One year |
IMPORTANT NOTES FOR BUYERS:
*WE CURRENTLY CARRY MOST OF THE ITEMS IN STOCK BUT SOME MAY BE OUT OF STOCK. PLEASE CONTACT US FOR STOCK AVAILABILITY BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*ETA FOR MAMBA PRODUCTS IS 6-8 WEEKS
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS