Whiteline Front Control arm - geometry correction kit KCA462
Whiteline Front Control arm - geometry correction kit KCA462
Whiteline
Notes: Important Contains Control arm and Bumpsteer bushings - adds +0.5deg caster + anti-dive Kits Required: 1 Warranty: 3 Year / 60,000Kms Kit Contents: 2 Shell Bushings, 4 Bushings, 2 Tubes, 4 Washers, Install Guide, Grease Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti dive geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering. KCA462Vehicle ApplicationsKCA462 is suitable for the following vehicles. Select a vehicle for specific fitment details:AUDI A3 MK3 (TYP 8V) INCL QUATTRO (9/2012-ON)AUDI S3 MK3 (TYP 8V) INCL RS3 (9/2012-ON)AUDI TT MK3 (TYP FV) FWD (2/2015-ON)AUDI TT MK3 (TYP FV) QUATTRO (2/2015-ON)SEAT LEON MK3 (TYP 5F) (2012-ON)SKODA OCTAVIA MK3 (TYP 5E) (11/2012-ON)VOLKSWAGEN GOLF MK7 AND 7.5 (TYP 5G) (11/2012-ON)VOLKSWAGEN GOLF MK7 AND 7.5 GTI, GTD (TYP 5G) (11/2012-ON)VOLKSWAGEN GOLF MK7 AND 7.5 R (TYP 5G) (11/2013-ON)VOLKSWAGEN GOLF ALLTRACK MK7 AND 7.5 (TYP 5G) (12/2014-ON)VOLKSWAGEN JETTA A6 MK6 (TYP 1B) (6/2010-2018)IMPORTANT NOTES FOR BUYERS:*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
![Whiteline Front Control arm - geometry correction kit KCA462]()
AUDI S3 MK3 (TYP 8V) INCL RS3 (9/2012-ON)
AUDI TT MK3 (TYP FV) FWD (2/2015-ON)
AUDI TT MK3 (TYP FV) QUATTRO (2/2015-ON)
SEAT LEON MK3 (TYP 5F) (2012-ON)
SKODA OCTAVIA MK3 (TYP 5E) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 GTI, GTD (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 R (TYP 5G) (11/2013-ON)
VOLKSWAGEN GOLF ALLTRACK MK7 AND 7.5 (TYP 5G) (12/2014-ON)
VOLKSWAGEN JETTA A6 MK6 (TYP 1B) (6/2010-2018)
Whiteline Front Control arm - geometry correction kit KCA462
Notes: Important
Contains Control arm and Bumpsteer bushings - adds +0.5deg caster + anti-dive
Contains Control arm and Bumpsteer bushings - adds +0.5deg caster + anti-dive
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents: 2 Shell Bushings, 4 Bushings, 2 Tubes, 4 Washers, Install Guide, Grease
Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti dive geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.
KCA462
Vehicle Applications
KCA462 is suitable for the following vehicles. Select a vehicle for specific fitment details:
AUDI A3 MK3 (TYP 8V) INCL QUATTRO (9/2012-ON)AUDI S3 MK3 (TYP 8V) INCL RS3 (9/2012-ON)
AUDI TT MK3 (TYP FV) FWD (2/2015-ON)
AUDI TT MK3 (TYP FV) QUATTRO (2/2015-ON)
SEAT LEON MK3 (TYP 5F) (2012-ON)
SKODA OCTAVIA MK3 (TYP 5E) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 GTI, GTD (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 R (TYP 5G) (11/2013-ON)
VOLKSWAGEN GOLF ALLTRACK MK7 AND 7.5 (TYP 5G) (12/2014-ON)
VOLKSWAGEN JETTA A6 MK6 (TYP 1B) (6/2010-2018)
IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
Notes: Important
Contains Control arm and Bumpsteer bushings - adds +0.5deg caster + anti-dive Kits Required: 1 Warranty: 3 Year / 60,000Kms Kit Contents: 2 Shell Bushings, 4 Bushings, 2 Tubes, 4 Washers, Install Guide, Grease Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti dive geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.
KCA462Vehicle ApplicationsKCA462 is suitable for the following vehicles. Select a vehicle for specific fitment details:AUDI A3 MK3 (TYP 8V) INCL QUATTRO (9/2012-ON)
AUDI S3 MK3 (TYP 8V) INCL RS3 (9/2012-ON)
AUDI TT MK3 (TYP FV) FWD (2/2015-ON)
AUDI TT MK3 (TYP FV) QUATTRO (2/2015-ON)
SEAT LEON MK3 (TYP 5F) (2012-ON)
SKODA OCTAVIA MK3 (TYP 5E) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 GTI, GTD (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 R (TYP 5G) (11/2013-ON)
VOLKSWAGEN GOLF ALLTRACK MK7 AND 7.5 (TYP 5G) (12/2014-ON)
VOLKSWAGEN JETTA A6 MK6 (TYP 1B) (6/2010-2018)
IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
Contains Control arm and Bumpsteer bushings - adds +0.5deg caster + anti-dive Kits Required: 1 Warranty: 3 Year / 60,000Kms Kit Contents: 2 Shell Bushings, 4 Bushings, 2 Tubes, 4 Washers, Install Guide, Grease Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti dive geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.
KCA462Vehicle ApplicationsKCA462 is suitable for the following vehicles. Select a vehicle for specific fitment details:AUDI A3 MK3 (TYP 8V) INCL QUATTRO (9/2012-ON)
AUDI S3 MK3 (TYP 8V) INCL RS3 (9/2012-ON)
AUDI TT MK3 (TYP FV) FWD (2/2015-ON)
AUDI TT MK3 (TYP FV) QUATTRO (2/2015-ON)
SEAT LEON MK3 (TYP 5F) (2012-ON)
SKODA OCTAVIA MK3 (TYP 5E) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 GTI, GTD (TYP 5G) (11/2012-ON)
VOLKSWAGEN GOLF MK7 AND 7.5 R (TYP 5G) (11/2013-ON)
VOLKSWAGEN GOLF ALLTRACK MK7 AND 7.5 (TYP 5G) (12/2014-ON)
VOLKSWAGEN JETTA A6 MK6 (TYP 1B) (6/2010-2018)
IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
